PO hot melt adhesive film -- EAA hot-melt adhesive film

Product introduction

Product type: H3E series hot melt adhesive film

Main ingredients: Polyolefin hot melt adhesive

The appearance of products: hot-melt adhesive film layer + non viscoserelease paper, light plastic film without paper

Regular width: 48CM, 50cm, 100cm, 138cm, 150cm other width can be customized

Conventional thickness: 0.06mm, 0.08mm, 0.10mm, 0.12mm, 0.15mm, 0.18mm

The length of each volume: 100 yards, 200 yards, 300 yards or according to customer requirements

The melting temperature of 120~130 DEG C:

Press temperature: 140~160 degrees

Press time: 10~15 seconds

Application: textile and clothing industry is sticky embroidery superscript,sticky, sticky badge weaving trademark, label sticking cloth; fabric, fabric,textile laminate; diamond, laser burnt etc.... .

Washing performance: can withstand 30 degrees below normal washing; more than 40 degrees of water washing, please choose the company more high-grade rubber.

Heat resistance: remained unchanged in the -10 degrees ~100 degreesenvironment adhesive.

Objective evaluation: the varieties of plastic has a certain fastness for textile,fabric adhesion, water resistance, the price is relatively cheap; on leather, PVC leather, TPU leather bonding fastness or almost no fastness, such as materials for higher bonding fastness, water washing is better, please choose the company H3S series, H3T series, H3A a series of hot melt adhesive film, can obtain better bonding effect.

Hot melt adhesive film is hot melt adhesive particles melt, the high precisioncoating head painted hot melt adhesive film like, product appearance similar to the double-sided adhesive, protective paper bottom layer with a layer of nonadhesive.

Hot melt adhesive film at room temperature is not sticky, when used as the double-sided adhesive paste, but more a heating process,

1, the rubber surface toward a bonding material C, can be selected, pressing machine, hot iron composite roller, high Zhou Bo, infrared heating instrumentthrough the protective paper, heating, let the glue surface melting, bonded to the need to stick the material C surface.

Tear the paper in 2, after cooling, material C surface with a layer of hot melt adhesive, and then with glue and adhesive materials need material C D stack together, heating, cooling, two materials are bonded together.

3, can also direct the protective paper hot melt film adhesive layer directly to tear, will be placed in the middle, materials C and D heating, cooling after the two materials are bonded together.

Selection of hot melt adhesive film for adhesive, has the following advantages:

1, clean;

2, environmental protection;

3, efficient bonding speed, a few seconds to realize;

4, security: no solvent, no hidden trouble of production link operation;

5, hot melt adhesive for some material adhesive fastness especially strong,performance is better than that of glue;

6, realize the automation of production -- using hot laminating machine can realize the efficient scale of production;

7, portable material with glue to sell, to be used only when a hot, save for glue,with glue, glue trouble;

8, paste can be repeated, hot-melt adhesive a plus, heating stripping, strippingof the product by heating up again adhesive;

9, the functional characteristics -- a hot melt adhesive have resistance to dry cleaning, wash resistance, low temperature resistance, high temperature resistance and other types of hot melt adhesive selection;

10, can be used as adhesives and sealants used at the same time;

Selection method of hot-melt adhesive film and the matters needing attention:

What is 1, you need a bonding material? Hot melt adhesive made of different materials, different adhesive fastness on different material, that paragraphglue is larger than all other gum on all of the adhesive material, such aspolyurethane on textile fabric fastness is extremely strong, and the bonding strength of PE plastics is almost zero;

Heat 2, your highest ability how much material temperature. For example, your material high temperature can not exceed 130 DEG C, hot melt adhesive youhave to choose a melting point lower than 130 DEG C so, because if the processing temperature is not up to the glue melting point, no melting glue,glue relay is almost zero;

3, you use the adhesive after the products, whether to consider the soft?Whether to consider in high temperature or the application of low temperatureenvironment? Whether to go through the washing? Do you want to dry clean?Whether or not to continue the tensile tensile? If the above requirements, it must choose above the corresponding properties of the adhesive film.

4, if there are many glue can choose, to choose the most cost-effectiveadhesive; in can reach your bonding conditions, choose the most thin glue(gum thicker, the price cheaper).

5, call or online to connect plastic poly company sales staff can help you choose the most consistent with the hot melt adhesive film of the products you need.