PES hot melt adhesive film -- copolyester hot-melt adhesive film - copy - copy - copy - copy - copy - copy - copy

Product introduction

Product type: H3S series

Main ingredients: copolyesters

The appearance of products: hot-melt adhesive film layer + non viscoserelease paper (a roll)

Regular width: 48CM, 50cm, 100cm, 138cm, 150cm, (the narrowest 5mm, thewidth 1.55m slitting customization)

Conventional thickness: 0.06mm, 0.08mm, 0.10mm, 0.12mm, 0.15mm, 0.18mm

Roll length: 100 meters, 100 yards, 200 yards, 300 yards or according to customer requirements

The melting temperature: 110~120 degrees, 120~130 degrees

Press temperature: 140~150 degrees, 150~160 degrees

Press time: 10~15 seconds

Application: PVC trademark gum, PVC high frequency standard gum, textiles and leather adhesive, embroidery superscript trademark adhesive, vampwithout sewing, car mats, carpets, electronic shielding material, reflective material adhesive...

Washing performance: better to wash resistance, resistance to 40 degree wash.

Performance of temperature: 5 degrees ~80 degrees environment does notchange adhesive fastness.

Objective to evaluate the H3S series: Leather glue film on fabric, etc., PVCmaterial has good bonding fastness, has good washing property, moderate price, the market larger amount. But the layer in winter seem hard, cold resistance is not good, such as the need for layer is soft, the products need to use in the low temperature extremely cold conditions, suggested the use of our H3T series film.

Hot melt adhesive film is hot melt adhesive particles melt, the high precisioncoating head painted hot melt adhesive film like, product appearance similar to the double-sided adhesive, protective paper bottom layer with a layer of nonadhesive.

Hot melt adhesive film at room temperature is not sticky, when used as the double-sided adhesive paste, but more a heating process,

1, the rubber surface toward a bonding material C, can be selected, pressing machine, hot iron composite roller, high Zhou Bo, infrared heating instrumentthrough the protective paper, heating, let the glue surface melting, bonded to the need to stick the material C surface.

Tear the paper in 2, after cooling, material C surface with a layer of hot melt adhesive, and then with glue and adhesive materials need material C D stack together, heating, cooling, two materials are bonded together.

3, can also direct the protective paper hot melt film adhesive layer directly to tear, will be placed in the middle, materials C and D heating, cooling after the two materials are bonded together.

Selection of hot melt adhesive film for adhesive, has the following advantages:

1, clean;

2, environmental protection;

3, efficient bonding speed, a few seconds to realize;

4, security: no solvent, no hidden trouble of production link operation;

5, hot melt adhesive for some material adhesive fastness especially strong,performance is better than that of glue;

6, realize the automation of production -- using hot laminating machine can realize the efficient scale of production;

7, portable material with glue to sell, to be used only when a hot, save for glue,with glue, glue trouble;

8, paste can be repeated, hot-melt adhesive a plus, heating stripping, strippingof the product by heating up again adhesive;

9, the functional characteristics -- a hot melt adhesive have resistance to dry cleaning, wash resistance, low temperature resistance, high temperature resistance and other types of hot melt adhesive selection;

10, can be used as adhesives and sealants used at the same time;

Selection method of hot-melt adhesive film and the matters needing attention:

What is 1, you need a bonding material? Hot melt adhesive made of different materials, different adhesive fastness on different material, that paragraphglue is larger than all other gum on all of the adhesive material, such aspolyurethane on textile fabric fastness is extremely strong, and the bonding strength of PE plastics is almost zero;

Heat 2, your highest ability how much material temperature. For example, your material high temperature can not exceed 130 DEG C, hot melt adhesive youhave to choose a melting point lower than 130 DEG C so, because if the processing temperature is not up to the glue melting point, no melting glue,glue relay is almost zero;

3, you use the adhesive after the products, whether to consider the soft?Whether to consider in high temperature or the application of low temperatureenvironment? Whether to go through the washing? Do you want to dry clean?Whether or not to continue the tensile tensile? If the above requirements, it must choose above the corresponding properties of the adhesive film.

4, if there are many glue can choose, to choose the most cost-effectiveadhesive; in can reach your bonding conditions, choose the most thin glue(gum thicker, the price cheaper).

5, call or online to connect plastic poly company sales staff can help you choose the most consistent with the hot melt adhesive film of the products you need.